Best glue for attaching seals to dry garments. Sets up like contact cement, no waiting all night.
Lower 48 states only, no air shipments.
Standard shipping only.
PB-300 Drysuit Seal Glue, 4 oz
Wipe the top of the base of the new seal, and the exposed band of rubber on the old seal, with MEK. Wipe both dry with a clean (lint free) cloth. Apply one coat of PB-300 adhesive to the original and new seal, where new seal will overlay the original seal. Wait for 3 minutes, and apply a second coat of PB-300 adhesive to the same two parts. Let them sit for 2 minutes. Apply a 3rd coat to the suit side, and install the new seal over the original seal using the edges of the two seals for alignment. Press the new seal firmly using your fingers. Allow the PB-300 to dry and cure suit for at least two hours. Longer is better.
If your PB300 is semisolid after coldweather shipping, simply loosen the lid, place the can in a watertight bag and immerse the can partly in warm water, lid up. It will be fine after it warms up. Don't store it in a cold place.